Thursday, February 14, 2013

An Introduction to Digital Logic Families

What is a Logic Family?

In Digital Designs, our primary aim is to create an Integrated Circuit (IC).
A Circuit configuration or arrangement of the circuit elements in a special manner will result in a particular Logic Family.

What are the advantages of creating different Logic Families?

Electrical Characteristics of the  IC will be identical. In other words, the different parameters like Noise Margin, Fan In, Fan Out etc will be identical.
Different ICs belonging to the same logic families will be compatible with each other.

Some Characteristics we consider for the selection of a particular Logic Family are:
  • Supply voltage range 
  • Speed of response 
  • Power dissipation 
  • Input and output logic levels 
  • Current sourcing and sinking capability
  • Fan-out 
  • Noise margin
The basic Classification of the Logic Families are as follows:
  • Bipolar Devices
  • MOS Devices
  • Hybrid Devices
 Bipolar Families:
  1. Diode Logic (DL)
  2. Resistor Transistor Logic (RTL)
  3. Diode Transistor Logic (DTL)
  4. Transistor- Transistor Logic (TTL)
  5. Emitter Coupled Logic (ECL) or Current Mode Logic (CML)
  6. Integrated Injection Logic (IIL)
MOS Families:
  1. P-MOS Family
  2. N-MOS Family
  3. Complementary-MOS Family 
    1.  Standard C-MOS
    2. Clocked C-MOS 
    3. Bi-CMOS
    4. Pseudo N-MOS
    5. C-MOS Domino Logic
    6. Pass Transistor Logic
 Hybrid Family:
  1. Bi-CMOS Family
Diode Logic 
In DL (diode logic), only Diode and Resistors are used for implementing a particular Logic.Remember that the Diode conducts only when it is Forward Biased.

Disadvantages of Diode Logic
  • Diode Logic suffers from voltage degradation from one stage to the next.
  • Diode Logic only permits OR and AND functions.
Resistor Transistor Logic
In RTL (resistor transistor logic), all the logic are implemented using resistors and transistors. One basic thing about the transistor (NPN), is that HIGH at input causes output to be LOW (i.e. like a inverter). In the case of PNP transistor, the LOW at input causes output to be HIGH.
RTL Circuit
Advantage:
  • Less number of Transistors

Disadvantage:
  • High Power Dissipation
  • Low Fan In
Diode Transistor Logic
In DTL (Diode transistor logic), all the logic is implemented using diodes and transistors.


DTL Logic
Disadvantage:
  • Propagation Delay is Larger
Transistor Tansistor Logic
In Transistor Transistor logic or just TTL, logic gates are built only around transistors.
TTL Logic has the following sub-families:
  • Standard TTL.
  • High Speed TTL
  • Low Power TTL.
  • Schhottky TTL.
  • Low Power Schottky TTL
  • Advanced Schottky TTL
  • Advanced Low Power Schottky TTL
  • Fast Schottky
Emitter Coupled Logic
The main specialty of ECL is that it is operating in Active Region than the Saturation Region. That is the reason for its high speed operation. As you can see in the figure, the Emitters of the Transistors Q1 and Q2 are coupled together.
Emitter Coupled Pair

Disadvantage:
  • Large Silicon Area
  • Large Power Consumption

5 comments:

  1. In this post I was trying to give an introduction to Different Logic Styles and explain the important Transistor Based Logic Styles. In another Post, I will be explaining the CMOS Logic Styles.

    ReplyDelete
  2. Nice post. Very clearly describe. Everyone understand easily basic of digital logic.

    ReplyDelete
  3. I am very thankful to all or any your group to share specific heartening stuff.
    best universal remote

    ReplyDelete
  4. एसुस ने लांच किया 7वीं पीढ़ी के इंटेल प्रोसेसर युक्त नोटबुक

    Readmore todaynews18.com http://bit.ly/2j6FBZb

    ReplyDelete

Thank you for your valuable suggestion. If you feel this post useful, please share our Blog with others!!! Comments just for Backlinking your Website or Blog will be Deleted...